Interfit S1 Manual Remote for all Cameras

A universal manual remote for use with all cameras that enables compatibility with the S1, S1a, and Honey Badger

The S1 Manual Remote is a universal remote that has been optimized for use with the S1, S1a, and Honey Badger strobes. The single-pin design allows for manual control and firing across all camera platforms.

Features

• Camera Compatibility: All camera models
• Flash Compatibility: Interfit S1, S1a, Honey Badger
• Frequency: 2.4GHz
• Max Sync Speed: 1/250
• Control Groups: 8 (A-H); *S1/S1a compatible with groups A,B,C only
• Channels: 15 (1-15); *S1/S1a compatible with channels 1-8 only
• Wireless Range: 320′ (100m)
• Battery Type: 2 – AAA Batteries
• 1 - Interfit Manual Remote

Manual Mode:

This remote is compatible with all makes and models of cameras (film and digital) in manual mode.

*Access to TTL and HSS functions of S1 and S1a require the dedicated TTL remotes

Remote Power Adjustment:

The S1 Manual Remote allows you to control the power output of your S1, S1, or Honey Badger from the camera position.

8 Control Groups:

This feature allows you to control up to 8 groups of lights independently of one another. Groups are displayed by letters, A-H.

*S1 and S1a can only be placed on Groups A, B, or C. Honey Badger can be placed on all Groups.

15 Channels:

Having 15 Channels allows you to work in close proximity with other photographers without interfering with each others’ light setups. Channels are displayed by numbers 1-15.

*S1 and S1a can only be placed Channels 1-8. Honey Badger can be placed all Channels.

Additional Controls:

In addition to triggering and manual control, the Interfit S1 Manual remote allows you to control the modeling lamps and audible beeps on your lights.

100m Wireless Range:

The 100m (320’) wireless range lets you roam freely around the studio, field, city block, or wherever your work takes you!

AAA Batteries:

All S1 remotes are powered by two AAA batteries.

3.5mm Sync Jack:

The 3.5mm sync jack on the side of the remote allows you to use your S1, S1a, or Honey Badger lights in conjunction with other radio flash systems. Simply connect your 3rd-party remote to the S1 remote via sync cable to fire all lights together.

AC Power Option:

The S1 Manual Remote can be powered by AC power using the micro-USB port on the side of the remote, eliminating the need for replacement batteries and disabling the remote’s auto-shut-off functions. This is especially useful for long-term or permanent camera fixtures.