Moersch MT3 Vario Sulphide Toner Kit #1

  • $34.99
#25795
In Stock
Stock availability shown for online orders. For stock at our Hollywood retail store please call 323-284-4321
Mfg: Moersch

Odorless thiourea toner for indirect sulfur toning.

You can alter the ratio between toner and activator. By doing so and by bleaching to varying degrees, it is possible to achieve image tones ranging from bright yellow via gold-ochre to red-brown.

It is important to thoroughly rinse the print before you start bleaching!

How long you have to bleach depends on the paper you use, the image tone desired and the dilution of the bleach bath.
If you don't want to bleach completely to retain the deepness of the shadows, you have to dilute to at least 1+20 to allow control of the bleaching process. This should result in bleaching times of between 20 seconds and 3-4 minutes. Before toning you have to rinse the print until the yellow cast has completely vanished! Highly diluted bleacher (1+30 and higher) will be removed a lot faster out of carrier and gelatine than strong bleacher solutions (1+10).

The bleach stock has an almost unlimited shelf life.
If the toner starts getting weaker, you can replenish with stock solution.
Toning of the bleached areas is completed after 20 to 30 seconds.
It is possible to use only parts of all stock solutions. Even after opening they are good for years.

Moersch MT3 Vario Sulphide Toner Kit #1 contains:

  • Bleacher stock solution: 100 ml to make 1-4 liters of working solution
  • Toner stock solution: 100 ml plus 250 ml of activator to control the image tone to make 1-2 liters of working solution

If you prefer yellow-brown or deep brown image tones, you need varying amounts of toner and activator. For that reason all stock solutions are available individually.

 

EAN: 4260349890731
Chemical Type Toners
Liquid/Powder Liquid
You might also like